2020-03-31: Finally I glassed the inside layup according to plans. There is a small adjustment over the foam block which is described in Joes plans. The BID that goes over the foam block needs to be cut between the block and the wing to make it lie flat on the wing. Pictures in Joes writeup illustrates this.
I made a paper template for the 9 plies, made each ply separate onto saran wrap before I transferred it to the wing. This worked well.
2020-04-07: With some help I flipped the wing over to do layer #4.
Not much to say about this other than that I did it the same way as layup #3.