Step 5: Outside layers (Left wing)

2020-09-10: Glassed the inside layup – layup #3 – according to plans, and with the adjustment neccessary due to the extra foam block for the hidde bellhorn.

One difference between the right winglet and this winglet is that I sanded down block A a bit less in the junction between the foam block and block A. This is to allow some more space for the bellhorn movement. Joe Polenek commented on this and warned me that it could be a bit tight, and he was right. I managed to get it to work, but I can avoid this by increasing the height a bit:

2020-09-12: Glassed layup #4 according to plans: