Specifications

Seats	4
Gear	3-cycle, retractable nosegear, fixed main gear
Gross weight	2050 lbs / 930 kg
Empty weight	950 lbs / 476 kg
Wing span	28.1 ft / 8,6 m
Canard span	11.5 ft / 3,5 m
Total wing area	101.4 sq. ft / 9,4 sq. m
Wing airfoil	Modified Eppler
Canard airfoil	Roncz 1145MS
Length	17.0 ft / 5,2 m
Height	7.9 ft / 2,4 m
Cockpit width front	42 in / 1,06 m
Cockpit width rear	38 in / 0,96 m
Engine	Lycoming O-360 (180hp)
Takeoff	1200 ft / 365 m solo / 1700 ft / 518 m gross
Climb speed	2000 fpm solo / 1200 fpm gross
Cruise 75%, 8500ft	220 mph / 191 kts / 354 kph
Cruise 65%, 8500ft	190 mph / 165 kts / 305 kph
Minimum speed	64 mph / 56 kts / 103 kph
Landing roll	1000 ft / 304 m solo / 1300 ft / 396 m gross
Max range 75% power	900 miles / 1448 kilometers
Max range 65% power	1000 miles / 1609 kilometers
Max range 50% power	1496 miles / 2407 kilometers
Service ceiling	20.000 ft / 6.096 m

This plane is not a kit – it’s plans built wich means that you must build mostly all parts from scratch. Some parts however are available, i.e. main landinggear bow, retract for the nose-gear, most of the metal-parts, canopy etc. Building time is 2000-3000 hours.

Other measurements:

Total span without wings, i.e. including spar and strakes	11.4 ft / 137 in / 348 cm
Neccessary hor/vert space to move the fuselage including spar and strakes out of the garage	8.1 ft / 97.6 in / 248 cm
Length of one wing (not attached to the plane)	12.5 ft / 150 in / 381 cm

The plans are sold by Aircraft Spruce and costs US$500.